Waterpipe adaptor for the Oleo medicinal cannabis vaporiser
Finding the vapour a little hot, or wanting the smoothest, safest experience possible? Add this adaptor to connect your Oleo to any waterpipe with a ground-glass connection. It can fit 14mm or 18/19mm downstems. The magnetic connection lets the adaptor fit easily above the heating chamber of the Oleo Panacea (it is also compatible with the Vivant Ambit).
How to use the Oleo Panacea Water Pipe Adapter
1. Prepare the Device
- Make sure the Panacea is turned off and cooled before handling.
- Remove any herb residue from the chamber and clean as needed.
2. Remove the Standard Mouthpiece
- Hold the Panacea securely.
- Gently lift and pull off the magnetic mouthpiece from the top of the unit.
3. Attach the Water Pipe Adapter
- Take the supplied water pipe adapter.
- Align it with the opening where the mouthpiece was.
- Allow the adapter’s magnetic connection to snap into place securely.
4. Connect to Your Water Pipe
- Insert the tapered end of the adapter into the water pipe joint (usually 14 mm or 18 mm depending on your model).
- Ensure a snug fit but don’t force it.
5. Load and Heat
- Open the chamber, load your dry herb, and close it.
- Turn on the Panacea and set your desired temperature.
6. Inhale Through the Water Pipe
- Once the Panacea reaches the set temperature, draw slowly through the water pipe mouthpiece.
- The water will cool and filter the vapour.
7. After Use
- Power off and let the Panacea cool down.
- Detach the water pipe adapter.
- Clean the adapter and your water pipe regularly to maintain smooth airflow.
Tips:
- Always handle glass components with care.
- Check seals and magnetic connections before each use.
- Keep the water level in your water pipe moderate to avoid splashing back into the Panacea.
Note: R18 product
Purchase of vaping or herbal smoking products is restricted to people aged over 18. Proof of age may be required. Deliveries are via CourierPost Age Restricted Delivery. See our shipping page for more information.
